shooting lefty w/ warp?

[excessenemy]

is it hard to shoot lefty w/ warp feed?

[Bartleby]

that's the beauty, 'cos you don't have to. i end up just rotating the entire gun 90 degrees and just shoot sideways out the left hand side of the bunker

[Schnitzel]

it really depends on what side the warp is on. if you're shooting lefty with H/L, then its no problem....if you have the warp on the side that you shoot with, it may be near impossible to fit your hand in there.

[excessenemy]

i should have gotten hopper right on my minimag cause i bought hopper left, and im righty so there is no way to put a warp on it.

[Bartleby]

you still have plenty of options with a hopper left body. you can run the hose down under the trigger guard; you can get a 90 degree adapter and send it to the top of the powerfeed tube. there are still plenty of ways to set it up even running a warp on the left with a hopper left body.

[Patron God of Pirates]

I had the same concern when I first got my Warp. The warp plate allows you to mount the warp at a pretty good angle. Doing this and running the warp hose around the bottom allows me to fit both hands in with no problems, and without having to melt or drill a whole in my revy.

You will only run into problems if you've got a fat hopper or fat hands.

[Havoc_online]

My setup is for a lefty, no one else but me can use it the pic is floating around if you look.

[FrAuStY]

Muahaha.. mines hopper left.. and it's warped.. Its about to be hopper right (cut to a warp body) but it works fine as is. Kinda eats batteries due to long hose, but thats the price you pay.

[excessenemy]

i like that setup. or run it under the trigger frame. i stil dont know if i want to get the warp though.

[Xen]

Im a lefty and I use a hopper left mag so my warp is on the right and I run the tube straight up to the p/f. It works great and it is a really tight setup when shooting out the left side of a bunker.

[excessenemy]

you have a pic?