Sear Assembly Trigger Rod

[gonefishin]

Ordered a new sear assembly and bolt from AGD for my RT. Does the trigger rod come pre-adjusted to the correct length? Have an Intelliframe on the RT.

Tried to call tech support to ask, but they not taking calls this week.

Thanks

[FrAuStY]

Yes.. it should be. Also.. that could be the problem with your warm bolt and sear. The benchmark frames are made way out of tolerance and often you have to change the length of the rod to get them to work correctly. The Previous owner may have done that and since you put the intelliframe on it that adjustment showed itself. The I-frame is made to the same tolerances as the stock trigger frame, so the adjustment for the benchy is now working against the i-frame. replace sear assembly and see it that helps. Although depending on how chewed up the bolt is.. you may wanna replace it too.

[PyRo]

It comes ajusted, all you have to do it put it in and your set.

[gonefishin]

both the new bolt and sear should be here today. I will get them in and see if that helps.

Thanks for the feedback.

[FrAuStY]

No problem.. good luck with your gun hope it works, well I know it will work with the intelliframe, a new bolt and new sear. Do you have any powertube spacers? You may need them if the previous owner changed it after putting the new frame on. We'll see how it goes :)