Their is a 5 second delay on my emag when I put the battery pack on and take out the yellow pin, the LED does not come up for about 5 seconds, I just charged the battery for one hour. What should I do?
Thanks
Thanks
-
Check to make sure the positive lead terminal screw where the battery goes is tightened down. Check to make sure the screw holding the board to the frame is tight. Also, charge your battery for about 3 hours. Don't trust the green light. If it's still doing it, your board is just being weird. BTW- What firmware version do you have? -
Definitely should get that updated. Did you get your trigger magnet fixed? If not, now would be a good time to send it in to AGD. They can fix the magnet, update the software and look over the rest of the gun. If there is a problem with your board, they can replace it with a new one. I'd call AGD and get an RMA.Comment
-
ok, Do I gotta pay for any of that? I fixed my magnet.Comment
-
Acutally no I didnt fix the problem with the magnet, the gun still delays on powering up. The gun is really messed up, im sending it into AGD on monday.Comment
Comment