Retro Valve Problems

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Merlin24
    Registered User
    • Jun 2002
    • 8
    #1

    Retro Valve Problems

    Air is leaking from between the two pieces of the body. I have replaced all the o-rings and oiled the o-rings.

    It shoots while it is leaking air but will not stop leaking.
    I have run out of ideas. Please help.
    Tags: None
    • RobAGD
      Cantankerous Administrator

      • Oct 2000
      • 2030
      #2
      Humm you have a leak.

      You need to hunt it down with some soapie water and look for the bubbles.

      There is a Fat reg body oring that keep the air from excaping in the manner your discribing, but I dont thing that you are actually getting teh leak from there.

      -Robert
      Serving AGD customers since 93, wishing I could beat some common since into some of them about 5 hrs later.

        Comment

        • BlackVCG
          Grubby Owner

          • Oct 2000
          • 4956
          #3
          I'll bet your reg. valve pin o-rings are bad. Replace those o-rings if you haven't already. If you have, replace the entire assembly and try again. There's two o-rings on the end with a plastic spacer in the center. Yes, the plastic spacer is suppose to have a slit in it.
          My Feedback

            Comment

            Previous template Next
            Working...