Does anyone know if you can install a gas thru front grip on the new r/t pro? Like the one that came standard on my older R/T that I foolishly sold. I really do not like the new set up on the pro. If this can be done where could I find the parts to do it?
-
Last edited by rblm; 06-08-2002, 01:47 PM. -
Yes it can and has been done.
You "may" be able scrounge the parts by placing a want ad in the misc. section...but I would think you might have better luck buying one from the AGD online store or www.modifiedpaintball.comJesus Saves....and it don't cost you a dime! Accept Him and you will be saved.
9 Volt Halo Mods For Sale
FREE*Custom Matrix Breech Rods*FREE
My Feedback
My Feedback 2 -
If you can find one you can use an old style RT one on there. And just twist the rubber grip around 180 degree's. Works nice.
Or you can drill and tap the existing one and make it a gas through. It already has the tap into the bottom at 1/8 NPT you just have to drill half way into the side and tap that and then connect the channel by drilling up from the bottom.Comment
Comment