need less trigger pull

[madmag21]

i have a 68 automag power feed i have the intelliframe the ans phase to back valve thing, the on/off pin, and the bolt...i bought all that crap to drop the stiffness in the trigger so it would shoot more like a cocker...needless to say it dropped but its not as light as a cocker yet...ive heard that if you turn your input pressure down to 750psi instead of running a preset 800psi it will drop tigger pull...is that true I NEED HELP!!!

[a_defect]

Well, you wasted your money on the ANS Phase 2. But as far as lightening up the pull, all you can do is shoot it alot. Your sear will wear a bit and your finger will get stronger. But if you want a trigger that feels like a cocker on a mag, check this out...

http://airsoldier.com/~punisher/gallery.html

Scroll down till you get to the Pnuemag.

And with the way the valve is designed, you are pulling against 375psi (somewhere around there) no matter what your input pressure.

[drx975]

Jesus that Automag mod is crazy...how did you do that??? I mean, that must have created HUGE timing problems for you. Nice job on that, but that must be a b**** to maintain.