MiniMag and Boomstick barrel!!!!!!!1

[NeroWolfe]

Help,

I recently purchased an used Minimag! It's in great shape, and works well. However, I just purchased a Dye Boomstick, and after about 500 shots I noticed an obvious "metal on metal" noise. I removed the barrel to find that the bolt is hitting the back of the barrel. A friend said that I have the original Minimag/Automag bolt, and need to replace it to cure the problem. My question is why doesn't this occur with the original barrel? Has anyone experienced this? is there another problem with the marker?

-Stock Minimag (approximately 6 years old)
-3000psi 68 ci tank
-14" Dye Boomstick
-Espansion chamber

Any help will be appreciated!
thanks,
Nero

[mykroft]

The stock barrel is larger bore than a Boomy.

Unless there is obvious wear to either the barrel or the bolt, don't worry about it.

I can generally tell what kind of barrel someone is using on a mag just by the sound signature of the bolt cycling

[a_malfunction]

Dye Barrels always have a pinging sound, on mags at least.

[boggerman]

My boomy pinged until I got a superbolt, very little ping now.

[S14-Racer]

I just got a used retro mag with a 14" AA and noticed wear on the inside of the left-side of the barrel. It looks and feels exactly like what would happen if the bolt was hittng the inside of the barrel. Its not much, and is not making a noise I guess it just needed the mag to wear it into place

As long as the bolt or barrel, like previously said, is not getting torn up (deep scratches , dings, or chips) I wouldnt worry about it either. The one I have wore down mabey one-hundredths of an inch or so, in that spot.

[Krazy Ivan]

I have the exact same thing. A mini with a boomstick. I have an old school boomstick though, but for that doesn't matter for this. I actually hear the same exact thing too, it's just because of the tighter bore. I don't see any dings or scratches in my barrel/bolt so I just let it be. If you are, you might try replacing the O-rings to get a tighter fit, if it's got movement.

[Army]

Nice Drop forward BTW! I'm a sucker for flames.





Geez, that didn't sound good....

[Panzerr]

Yeah, that's a crazy looking drop? Custom made?

[NeroWolfe]

Minimag Boomstick sound

I really appreciate all you guys help! Glad to see so many people willing to give advice/testimony!

I needed a drop forward fast, and we have no paintball stores here, so I whiipped it out using 1" x 2" aluminium box. 5 min on a band saw, 15 min w/ my dremmel and poof! I've got a drop! I need to round some of the flame tips, and polish it now!