warp questions

[Polishpickles451]

I've got a AGD used warp feed coming in the mail right now. Is there anything I should be aware of? I've got a 68 classic powerfeed left with 68ci flatline.
How should i set it up, and do i have to adjust it in some way to feed properly?

[paintbattler]

well, does the warp come with a 90* adapter? if it doenst u will have to run the hose under ur gun. and also. if your right handed, the warp needs to be on the left of the gun. if ur left handed, the warp needs to be on the right side of the gun

[FrAuStY]

You will need to adjust the sensitivity for your gun, and you may need to add/remove some dwell jumpers depending on your personal fastest rate of fire. This is mainly to conserve battery life. You can look at the online manual at airgun.com to read how to set this up.

[hitech]

The directions are pretty good. You will need longer screws (10/32) to bolt the flatline and warp adapter plate up with. Also, when running the "break in procedure" use a cheap 9 colt battery and let it run until it dies. Other than that, follow the instructions. Also, I would suggest drilling the hopper, like I did!

BTW, if you don't get the directions you can download them from AGD.