Intelliframe

[RTP01066]

can you run a link to rev. and warp feed?

[mykroft]

Yep, there is a switch mount internally for intellifeeding a warp or revvy. If your warps intellifeeded, you don't need to intellifeed the revvy. You will need to aquire and mount the switch hardware.

[FrAuStY]

Intellifeeding the revvy works best IMO. If you have your dwell and sensitivity setup right, you really can't outshoot the vibration sensor on the warp. The revvy will need to be intellifed to make sure it keeps your warp primed. But.. do what ya want... after all its your gun