RT PRO barrels

[Doug]

I have a RT PRO and i have a stock barrel i would like to put a longer barrel on the gun. So i purchased a dye boostick and tried to install it and noticed the locking guide is diffrent so the feed hole disappearse when you try to lock it. I have a left feed port looking down the barrel. Is there differnt barrels? What kind of barrel do i go with? Can someone help.

[Telefragged]

If you look at the barrel, for power&standard feeds, there should be a groove cut like a T in the bottom of the barrel where it engages the twist-lock. Either try turning the barrel so that it lines up, or it looks like you ended up with a centerfeed barrel. If it is the latter, contact the store where you purchased the barrel, and arrange for a return or exchange.

[Doug]

I contacted dye and three different people told me they dont know why the barrel wont work. they only show one barrel type and i know iam not crazy.if i hold my barrel up to the other barrel the t slot goes opposite of mine. does any one have a rt pro? i cant be the only one who thinks the stock barrel is too short.

[paintbattler]

well, there may be some other ports where u can twist it on..mine has 2...

[Top Secret]

Is your RT Pro Vertical Feed?

[Doug]

I talked to the nice folks at BadBoyzToyz and they explained it to me. I have a left handed power feed.I was told there are only two differnt styles center feed or right and left power feed. So thanks for your help everyone.

[SiLeNt X]

ddi that make sense to anyone?

[than205]

It means there are only 2 type of barrels now a days.
The ones with the "T" and the center feed style.
I think.

[mykroft]

Some have 2 independant grooves instead of the T, you need to try both grooves. And of course the Vert feed barrels aren't compatible with anything else.