double 9v warp??

[RT_Luver]

how can this done? and does it have any dis/advantages?? will the warp be able to feed faster with 2 9v insteada 1. just a couple questions. any response will be appreciated. THANKS

[personman]

Cha been done
Either parrelel and 18v(im sure it screws your motor)
Search for parrelel warp mod or something

[virus]

PTP make a 12v mod.... i got a couple of them for my warps... they work great....

now that i know what the parts are and once my local rat shack has all the parts in stock.... all 3 that i want that is... i plan on building more.... of course i need to find my multimeter... of i could just break down and buy a new one =)

[mykroft]

For extra run time, use 2 9V in parallel. For more speed get a PTP 12V adaptor and run the 9v in series, reg'd down to 12V, just like a Revvy. DO NOT just run the 9V's in Series for 18V, unless you want to burn through Warp boards.

[RT_Luver]

where can i find or whatever that PTP adaptor. also, how can I run 2 9v parralel? thanks

[doughboy]

You could order one from pro team products which is the company that makes it or go to a pro shop the carry's pro teams products

https://www.proteamdirect.com

[RT_Luver]

I might just be blind, but I have looked all over that sight adn the only place I could find it was where in the options box when you wanted to buy a warp ...SOMEONE HELP ME... please send me a link from a site that has them

[Aranarth]

Could someone post the rat shack part numbers. Or even better, is there any how to's to do it yourself? Thanks.
Oh, and running 2 9v in parallel. If you have an adapter to plug 2 into, that works. Or, if you have two of those 9v plugs, you can strip and match the wires. Or, if you don't have either, you can make a jumper from one battery onto the leads of the existing plug. Just make sure that both (+) leads and both (-) leads go to the same thing (ie, ensure they are in parallel).
-AranarthX

[RT_Luver]

I'm a lil confused...


so PTP makes a 12v mod to increase the rate at which the warp can feed RIGHT? and also, theirs a mod you can do that you can get the parts at radio shack that does the same thing, RIGHT??

if so, could someone give me a list of the parts that I need and sorta how to do it?

ALSO, with out doing the mod, how fast can just a regular warp feed at?