How Do I install a Drop Forward?

[Farlow]

This is probably a very simple thing to do, but I am not grasping it. I have a RT PRO. Is the process to setup the drop forward as follows:
1) Unscrew adapter from bottom of handle
2) Screw in drop forward
3) Screw adapter onto drop forward and screw in tank to play

I was looking at the shocktechs to do this process. I tried searching the forum on the subject, but there is to much info on cradles, regulators, on/off valves etc...that it started getting very confusing.

Thanks,

Gary

[mykroft]

You've got the right steps. Remember that you will need 2 additional bottom line screws (which won't come with the drop.) These are 10/32 screws usually 3/4" or 1" long.

[zvanut]

you have it right but you might need some 1 1/4 to 1 1/2 inch screws for it to work. i am using 1 1/2 on my warp with no drop

[paintbattler]

yea thats right...u may need to put the tank in all the way so it will work