Trigger Frame Help!!!!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TERRIER126
    Painter =)
    • Jun 2002
    • 69
    #1

    Trigger Frame Help!!!!!

    I have 68 classic with original trigger frame
    i bought a chrome Dye 45 frame. and the original trigger parts wont fit right.....i dont know if im just doing it wrong, but then again I put old one back on....why wont it fit... help....
    Tags: None
    • Krazy Ivan
      I don't do Anno,
      • May 2001
      • 600
      #2
      With the Dye frame you just have to get an aftermarket trigger. The pin that holds the trigger in will still fit. After that the sear will drop in and your all set.
      If you must have a Safety you'll have to buy one that'll fit it too. The stock one's won't.
      Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

      See ya in the dead box!

        Comment

        • TERRIER126
          Painter =)
          • Jun 2002
          • 69
          #3
          ...

          actually the pin didnt fit.....i milled it out a little and made it fit....but the trigger doesnt come out far enough....anyway i can make it come out?

            Comment

            • Krazy Ivan
              I don't do Anno,
              • May 2001
              • 600
              #4
              Do you mean the trigger rod is pushing against the trigger? If so you might want to adjust the trigger rod in a little bit by screwing it into the sear a little. That would give it more clearance. By doing that however you risk not being able to push the On/Off assembly in enough to fire the gun. However if the trigger is installin in there right it should be fine, even if you adjust the length of the trigger rod.
              Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

              See ya in the dead box!

                Comment

                • TERRIER126
                  Painter =)
                  • Jun 2002
                  • 69
                  #5
                  so...

                  all i have to do is basically make the rod shorter...but not too much either... right?

                    Comment

                    • Krazy Ivan
                      I don't do Anno,
                      • May 2001
                      • 600
                      #6
                      Shorten it a little, get enough clearance to be able to pull the trigger and also let the gun gas up. The rod has to be able to extend to it's fullest and not be pushing the trigger stiff.
                      Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

                      See ya in the dead box!

                        Comment

                        • TERRIER126
                          Painter =)
                          • Jun 2002
                          • 69
                          #7
                          k

                          ok thanx so much ill try that when i get home tonight

                            Comment

                            • Krazy Ivan
                              I don't do Anno,
                              • May 2001
                              • 600
                              #8
                              No prob bro. Just make sure your careful with it and don't overadjust, you can really throw your gun out of whack if you adjust the rod too much.
                              Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

                              See ya in the dead box!

                                Comment

                                Previous template Next
                                Working...