is it possible to put a reagular auto/minimag valve into a emag. i know you can put the retrovalve into a regular mag but can u put a regular mag valve into an e-mag(i know it would be dumb and it would have shootdown and stuff but is it possible). Im just curious by the way.
-
-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 Flatline -
Yes, it's possible. With the E-Mag upgrade, AGD will use whatever valve is with your gun. So if it's a stock valve they will use that and match it to the rest of the gun so it works properly. -
does this mean i could use co2 on an e-mag with a regular mag valve if i keep the liquid out. That would be cool. I would call it the poor mans co2 e-mag.-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 FlatlineComment
-
Yes you could. The only reason you have to use nitro with the factory emags is because of the retrovalve on them. With a stock valve, you could use co2. However, you may come across many problems if you really climb on the trigger. If you plan on doing this, I would highly suggest an anti siphon tank, and if at all possible, set it up as you would a shocker with a maxflow reg. Just my $.02
-ChrisComment
-
thats great. do we know how long the e-mag conversions will go on for because im very poor. thanks-Minimag Body HR
-Retro Valve
-Z grip with extender
-12V X-Boarded Revvy
-6 barrels including:10 Inch DYE SS, 8 inch Steel Wind, 8 inch stock minimag barrel, 12 inch BOA barrel, 12 inch Lapco Autospirit, 16 inch SPAA
-68/3000 FlatlineComment
Comment