switching triggers on your trigger frame?

[Mega Man]

I want to know how to switch your triggers on your grip frame. I've gone over the frame a 1,000 times and i just dont see how you do it, do I have to send it in?

Thanks for the help

[Tunaman]

triggers

Just knock the trigger pin out silly.

[Mega Man]

Is this the trigger pin?

?????????

[Cha0tic]

well, the picture doesn't work.


the trigger pin is located above and slightly colser to the trigger than the safety. this is the hinge in which the trigger goes back and forth on. you should be able to take a small screwdriver and tap out this pin with a hammer. then the trigger will come out and you can put a new one in.

[Mega Man]

Alrighty

Well thanks for the info you guys

[EnW]

I don't know about the rest of y'alls guns but I had to take my safety out also.
You take the grip frame off the body rail and take out the very,very tiny set screw to release the spring and little bb and then push the safety pin out. Be careful not to lose those parts as they are very small.

[Mega Man]

Not on mine

I got a Benchy and it doesn't do that. What kinda frame do you have EnW?

[EnW]

I was refering to the stock frame. It wasn't clear that you were referring to a benchy.