Mag volicity messing up at high rates of fire!

[paint king]

Okay whenever i go into high rates of fire the volocity really messes up. I think its a problem with my powertube but how do I fix it. Most importantly if i got a level ten kit would it fix it?? Thanks.

[rikkter]

you should watch the tape that comes with your mag buddy.
mag valve has three parts. the regulator, the on off, and the powertupe.

it says that anything that has to do with velocity is the regulator. take apart the gun, unscrew the back portion of the valve, and clean the reg seat and things.

[paint king]

K........

I'll try it and see if it works. By the way i dont have that video and I never have but thanks for the advice.

[pete-is-god17]

register your mag and ask for a video

[paint king]

k.....

I will do that but what if the prior owner already had it registered. He gave me the number but do i have to re-register? Thanks.

[PaintballSucka]

I'll just send you the vid

[Kdog]

My friends mag did the same thing, change the reg seat.

[than205]

paint king - Registering gives Airgun an idea of the markers history. If it's been reported stolen and whatnot. There should be no problem re-registering it if it hasn't been stolen. And you are going to be registering the serial number on the side of the valve. While your at it, be certain that you have the Parabolic power feed plug. After you register, get on the phone with AGD and find out what you need to do to get a video. And then if you need a new feed plug ask them if it would be no trouble to send you one also.