Bad Feeding and Chopping minimag problem! please help!

[Greg98]

hi. i was out shooting a little paint in my backyard, and this was my second time shooting around with my minimag. this time, the powerfeed seems to be rstricting ball flow and no matter what i do the balls just won't go into the chamber well. i've tried every possible position with the powerfeed plug but to no avail. i have even tried sanding down the powerfeed plug but again it won't work. the barrel is in properly and i have disassembled the marker twice now looking for anything out of the ordinary. but everytime i go back out to shoot it'll shoot one or two balls and then chop in half a mis-fed ball. if anyone can suggest something for me to try please help me out! thanks alot!

PS- my setup is a HL PF Minimag, 12volt revy, 68 3k HPA, a drop and gas thru grip if that would make any difference

[pete-is-god17]

check your nubbin

[mrhooie]

and do you have the new parabolic powerfeed plug?

[Greg98]

the nubbin is cool, i checked that right away. this minimag is fairly new, so i assumed it had the parabolic plug, but surprisingly it didn't. so i just finsihed sanding down the plug making it more curvy, so i am gonna go out and try it again. thanks for the suggestions guys

[Greg98]

well, thats it! it was the plug that was the problem. i'm pretty sure it was the old kind so after sanding it down to a parabolic style it fed great! thanks alot for your help guys, sorry for the newbish question :o....this is my first mag tho

[mrhooie]

Welcome to the club Glad its up and running

[jewie27]

new feed plug

Where can I get the new feed plug? How much are they?

[mrhooie]

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=234&CATID=6

$2.00 usd

[jewie27]

Chopping

I was a beta tester for the Level 10 upgrade, and all I can say it was the best $65 dollars ever spent on my Minimag. It will solve all of your problems; since installing it, I have not had to use my squeegee during a game.