Grease or regular paintball oil?

[robodisquo]

I have some silicone grease that I've used with HPA guns and was wondering where this stuff would work well on the Automag. I hear people talking about putting grease on the spring pack inside the valve, but where else would benefit from a regular application of grease (as opposed to just paintball oil)? A lot of this is probably covered in the video, but I don't own a VCR.

[The Creature]

Nah man you do not need to greese anything (not even the bolt). All you need to do is take apart your gun every once in a while to make sure you clean out any debris that may have gotten in there and to oil your o-rings. Everything else will work fine as is.

[mykroft]

Dow 33 should be good for the spring pack, otehrwise only use oil.

[puckmaster]

I would just use regular gun oil, and i might think about putting some grease on the spring pack. and also,I would clean the bolt and take apart the valve halves and wipe that down every 1000 shots fires.