My warp Will Not spin

[ronron2112]

it wont spin except when i manually make it spin. the sensitivity is set just after it stops spinning. If i tap the gun with a quarter, dry fire, or fire with paint it will not spin. it only spun once when fireing, and that was when i first got it (long time ago). i dont get it!! im playing sun and gotta tune it by then...

thanks

ps. this is my 3rd battery...

[PaInTbAlLeR476]

turn the sensativy more clockwise.

[BlackVCG]

Take off the black plate on the back of the Warp. Unscrew the two screws holding down the board. Because of the wire length, you can't pull the board out, but lift up on the right side of the board and you'll see the backside of the vibration disk.

There's two holes in the Warp shell that lead to the disk. There should be two springs in those holes. If one or both are missing, that's the problem.

[ronron2112]

is the disk the silver think with the slots in it??

i unscred the 2 screws that go to that, and there isnt anything inside of them.