how do i get the saftey and trigger off my intelliframe?
-
NYX-Matrix/Mamba IR3
-----> Click the picture, do it!
PBnation
Impulse Owners Group (IOG)
E-mail
-
I'm not sure on the safty, but on my benchy there is a screw on the top of it you can undo and pull it out all the way. I'm getting a intelli tomarow!
As for the actuall trigger out, you should see a round pin on the grip. find some thing and push it out. It should be very hard to do-or so I heard. If you had a pnuematic something to punch it that would be good. -
Make sure you push it out from the "S" side and press it back in from the "F" side. The hole gets tighter as it goes through the frame and if you try to go the wrong way itll be hell to get out and may not fit right going back in.
Mine came completely out with a single tap of a hammer and an awl, btw.Comment
-
When I took my intelliframe apart, I unscrewed the allen head set screw to remove the spring and ball first. My saftey still wouldn't drop out. I noticed it caught on part of the trigger. Since I was removing the trigger anyway, I knocked out the trigger pin and removed the trigger. The safety slid right out.
Hope that helps.
Comment
Comment