Can my 'Mag work at 450 psi?

[paintbattler]

I need to know if my 68 Classic 'Mag will work w/ a tank thats preset to 450psi. I have no second reg or anything. Here is whats on my gun

68 Automag Classic
-Black Benchmark Forgrip
-Black Benchmark Cradle w/ On/Off
-than 205's Custom Forgrip Extender (black)
-AGD Z-Grip
-Black E-mag/RT Pro Mainbody P/F H/L
-12" Smart Parts Tear Drop
-Rear Velocty Adjuster w/ Tourney Screws
-Serial Number CF42256
-Black Macroline
-All in mint condition.

[rehme]

it might be able to for like a shot or 2 because that is what I THINK the reg regulates it to so you have to have the pressure around 650ish.


-mark rehme

[subbeh]

Yes, but I forsee mega starving problems.

DEFINATLY not with an RT valve.

I wouldn't...

Worse comes to worse, if you have a bottle, order an 800 preset Me'lee from www.predatorpaintball.com I THINK that's the address. $50ish.

[Aranarth]

I had my tank about that low on my rt today. Bad idea. Since AGD uses a dump chamber system, I could get one shot. But if I tried to shoot a string they would die off very fast. Just try not to forget to refill when you get around 1000 (like I did :| ).
-AranarthX

[mykroft]

Yes it could work, if you don't mind giving up velocity adjustment(Gut the internal reg). The mag runs around 400-450psi, but as it has an internal reg, you need to run more than 600 psi into it for the reg to work corrctly, otherwise, welcome to planet shootdown.