me CHOP CHOP CHOP

[ang310fd347h]

i chop balls LIKE mad'

ive got a 9v it seems to work fine wut could make me cut paint ive got an ans bolt could that be it?? its not my ppaint ive shot TC flash and marbs nothing works

[a_malfunction]

Short-stroking perhaps? Pull the trigger all the way back and let it go all the way forward before you pull it again. I would put the stock bolt in just to see if that was the problem. And you might need a 12v revy.

[Big_Show]

Call AGD for the new PowerFeed plug. Are you using the V or P style nubbins? Get the V style. Is there a foamy on your ANS Bolt? If not put one on with super glue. Beter yet, try to get a stock foamyless bolt from AGD. And of course be careful to not short-stroke. As mentioned by a_malfunction, get a 12V Revy; however, you could just not shoot soooo fast. :-P

Good luck.

Big_Show

[ang310fd347h]

wut prob could the p nubbin cause?

[Big_Show]

P Style nubbins tend to cause chopping. If you had the new style Enlogated Nose Bolt from AGD it can hit or even bend your nubbin. Call AGD and they will send you 1 or 2 for free.

Big_Show.

[Wes_M]

Trust me from exsperience, it's that damn ANS Phase II bolt. I had that for 2 months and my gun was a blender. I finally put my stock AGD extended nose bolt back in about 3 months ago and I have'nt broken a ball since and that was about 3 months ago and about 2 cases of paint. Hope I helped ya out.

[ang310fd347h]

thanx guys does ur stock agd bolt still have the foamie??

[oldguy]

I would recommend getting rid of the Benchmark double trigger frame. I had one, and I feel it caused me to chop paint like mad. Sold it and put the standard single trigger fame back on. Now I hardly chop a ball. Also, i recommend getting the AGD extended bolt.

[Big_Show]

No foamie on the new long nose bolts. Thank God! The only problem I had with the ANS Phase II bolt was keeping those darn foamies on. No Chops but other ppl have had issues with em. Best Advise out there is to stay with AGD parts.

Big_Show