level 10 problem, tourny in 6 hours

[kickass68mag]

we put a level 10 in my friends emag and followed the movie online and it shoots but shoots in 3 shot burst and when it stops on the pencil we put down the feed tube it stops and leaks air down the barrel

anyone know what we are doign wrong ?

we are using the 1.5 with 2 shims

[Havoc_online]

what spring are you using? if you want it soft on paint, just try using the cut spring, keep the carrier o'ring oiled turn the velocity up till it fires reliably, try putting a around 800-850psi into the gun(do you have a chrono?)... hope this helps.

[rehme]

try putting more shims in.

[warpfeedmod]

also it WILL leak air down the barrel when the bolt stops on the pencil/paintball. you should hear little pfft pfft sounds but it should re-cock.