Level 10 issues still.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • warpfeedmod
    I came, I saw, I painted.
    • Jun 2001
    • 1265
    #1

    Level 10 issues still.

    Okay, so I put the cut spring in there, pumped up the velocity till it started to leak out the back, then backed it off a bit...fired a few shots, got into some rapid fire (not retro tho) and then it started leaking down the barrel.... backed out the velocity and still leaks...

    so I remove the shims or go with a smaller carrier?

    Not sure I quite understand how this all works..

    Thanks in advance!

    edit: Also now I can't seem to get the carrier that's in there out. Any ideas?
    Last edited by warpfeedmod; 07-28-2002, 09:22 AM.
    My Trader Feedback
    It was the only tournament I've been to where they have more cases of beer than paint. - gimp
    Tags: None
    • mike e
      Registered User
      • Jul 2002
      • 147
      #2
      how many shots have you put through it? maybe everything has not seated properly yet. i would give it at least a couple hundred shots to seat itself, does the lx need that? i dont remember from when i read it but i thought they did............
      mostly he was insaine but he had fleeting moments of mere stupidity

        Comment

        • warpfeedmod
          I came, I saw, I painted.
          • Jun 2001
          • 1265
          #3
          well I actually havn't put any paint through it, it still seems rather hard on my finger when dry firing it, and it crumples the dollar like it's not even there. That's when it started leaking down the barrel. I read that long instructions on the LX page, but I can't get out the carrier that's in there to change it. It seems stuck.

          All in all I'd say I've taken about 200 or so dry shots through it.
          My Trader Feedback
          It was the only tournament I've been to where they have more cases of beer than paint. - gimp

            Comment

            • TransMan
              Man Beast!!!
              • Apr 2002
              • 3152
              #4
              nothings wron with it you just broke in the oring a bit, now you have to go to a smaller carrier. To get the carrier out some people have bent a paper clip and pulled it out that way some people put their field strip screw down the powertube and then pull it out slowly.

                Comment

                Previous template Next
                Working...