damn lvl 10!

[SIGSays]

damn thing won't work with the 3 springs it came with...... then i had to put on the stock bolt..... then it stops shooting everyonce in a while..... it's starting to piss me off and it still won't vent,,,,,,

[shartley]

[Halliday]

Originally posted by shartley

I esp. like how he listed the ball dentent. Snazzy!

[magman007]

ok, well it wont vent with the stock bolt, tell us exactally what you have in there, what shims and stuff. how far is your velicity addjuster in? tell us everything before bad mouthing the thing

[shartley]

Originally posted by magman007
ok, well it wont vent with the stock bolt, tell us exactally what you have in there, what shims and stuff. how far is your velicity addjuster in? tell us everything before bad mouthing the thing

[SIGSays]

i mean stock spring... i got 2 shims a 2 carrier and a stock spring.......i'm not bad mouthing .... i'm just sayig it's pissing me off..... i should list the barrel condoms too

[Kaiser Bob]

how did you manage to use a stock bolt in the Lvl 10?

[magman007]

ok, and what is the problem? its shoting to fast? not shooting at all? not venting early enough? venting to early? what? we need to kno. If the bolt isnt cycling then you may need to crank up the velocity. Also remember to keep it all hevily lubed.

[petefol]

what do you mean it stops shooting every once in awhile? does the bolt stick, or just stop? did you try the 1.5 carrier, that fixed the bolt sticking for me.

[SIGSays]

Originally posted by Kaiser Bob
how did you manage to use a stock bolt in the Lvl 10?

not stock bolt..... stock spring... if you look one post ahead of you i corrected myself

Originally posted by magman007
ok, and what is the problem? its shoting to fast? not shooting at all? not venting early enough? venting to early? what? we need to kno. If the bolt isnt cycling then you may need to crank up the velocity. Also remember to keep it all hevily lubed.

with the springs it came with it wasn't shooting at all... the shortest one shot then wouldn't shoot everyonce in a while.... then with the stock spring it doesn't vent..... but amazingly doesn't chop.... but i still wanna put my finger in it... i tool the velocity all the way.... i was afraid to crush the spring pack.... and i'll work one the lube part

[SIGSays]

and blah blah yeah i installed it all right... i have enuff gas.... i turned the velo. up high enuff it just doesn't shoot with the long spring, iddle spring and the smallest lvl 10 spring..... then since it won't even gas up..... so then when i try to take off the tank i have to unscrew it out with my hands..... i have to like force it out...(lol sounded like im constapated)..... which is a pain in the ***..... when it's pressurized.... i mean it's just a pain in the *** for just having to do that 4 times...... got annoyingand yes i get enuff pressure off my tank and everything... no stupid newbie mistakes here...

[tranman]

Are you sure you're turning up your velocity enough? If its not venting, add another shim.

[SIGSays]

yes it's high enuff..... i screwed it in all the way? duh! i already said that.... i was afraid i crushes the spring pack.......

[petefol]

hmmm. have you tryed taking everything apart and then reasembling it following the directions exactly. also print out the parts list picture so you know that your using the right parts.

[alkafluence]

Sig,

I know exactly what you're talking about. I spent about 3 hours with an AGD certified tech and we still couldn't get it to work. Randomly it will just stop being able to fire and you'll have to push the bolt back.

I have tried the carriers from 2.5 down to 1.5 with combinations of 1-2 shims and varying bolt combinations.

I got it to actually work with the 1.5 carrier, 1 shim, and the clipped spring, but it still will just suddenly refuse to shoot at random intervals. And this was with an AGD Flatline 4500 going right into the Valve (so it's not an airflow problem.)

At this point I have an RA number and am having Airgun Designs look at it.