warp feed question?
im thinking of getting a warpfeed but first i have just a quick couple questions: can you mount one on the left side of your maker and what,if any, is the difference between the AGD warpfeed and the proteam warpfeed?
-
68 automag classic s/f *Blue STO 01
16" ironman boomstick dye stickys
12" lapco autospirt blue 12v revy
PMI sight rail 88ci 4500 PMI
DYE 2 finger 45 frame
DYE sticky grips
benchmark chrome body rail
KAPP gas thru forgrip
TKO drop forward
48 ci PMI pure energy
68 ci ACI bulldog
ricochet 2k -
Yeah you can mount one on the left side. That is where right handed people mount them.
-
There are only two real differences between the AGD Warp and the PTP Warp.
1) AGD has an internal vibration senser while the PTP one is located on the Mounting Bracket.
2)The Mounting Bracket holes on the bracket that comes with the PTP is a little different then the AGD one and this can make it more adjstable. This could be helpful when mounting the Warp on a non AGD gun."Relax. Don't worry. Have a Home Brew."
-Charlie Papazian
Feedback: http://www.automags.org/forums/showt...threadid=40134Comment
-
another thing
the feed tube of each brand are slightly difference from each other
The AGD's is quite smaller that The PTP's so you cant swab the feed tube for each one of themComment
Comment