Wierd Warp wont stop spinning problem

[p8ntballa]

I got another warp, it was used. All its life it was used on an Intellifeed emag. Now that I have it I hook the battery up and it spins constantly, with the sensitivity all the way down and I have also messed with the jumper with no luck. Any ideas?

[Omicron]

Maybe the white on/off button is stuck down or something, try to see if theres any dirt in/around the white button holding it down.

[halo13]

The same thing happened to me to and I couldn't understand what was going on. It seems that originally I had connected the warp while I still had the battery plugged in. When it started to spin, I unpluged it from the mag, and removed te warp battery. I then connected the warp to the mag and then plugged the battery into the warp. That seemed to fix the problem.

[p8ntballa]

The white button works fine, I was clicking it around earlier to see if it would stop.

I kind of didnt understand what you were saying but I havent had it hooked up intellifed to a gun. I got it for a backup to the warp I ahve now.

[virus]

so pa8ntballa i see your LvX had arrived.... at least according to ups.....

its sad when i can see that mess of letters and number and know what its for....

[p8ntballa]

lol yep, sure did.

[DARTH MORG]

your sensor may be wasted. n/t

/

[p8ntballa]

Good point. I will put another warp baord in it and see if it does the same. Till then UP!

[p8ntballa]

Nope, not the sensor.