Help set up my nitro

[spawnboy]

Hi,
I've got an Air America Raptor with what is I believe a Raptor Cradle by Benchmark. What I need help with is that it has a gauge on the reg. but I need a gauge somewhere else on the gun to show my input. Any suggestions would be great. I don't really want to go with a gas thru grip so please skip that suggestion. Include details of prefered gauge as well.
Im shooting a classic 68 with retro Lvl 10'd. It's set up now with a screw in Crossfire and macro line.

Thanks,
spawner

[angelKiller16]

well the ony way to do this i can think of w/o gas -thru is to do something like this, ss hose connected to raptor outut, female qd on end of hose, male qd to asa w/sidecheck connected to a bottomline part, and a 1000psi gauge in the output of this bottomline part. it wont be on the gun but this will be the only way i can think of and you will have to adjust it with this on then take it off and connect it to your gun. To adjust it put he tank on almost no ouput and gradualley increasing it while purging using slide check contraption. You will eventuage get to the output you want and then take this off and hook the tank up to your gun and don't touch the output again. otherwise just buy a special guage that does all of this for you made by air america. Hope i helped

[BajaBoy]

what ide do if i were you.. unless u spent like 60$ on all dye or ptp gauges.. then just fine tune everything till u like it and leave the gauge off its noy to have but u dont Really need it.. if u still want one.. and run a gasthru then go to www.skanline.com and get a taso asa.. theres to ports..

[spawnboy]

can you not run a gauge right of the valve? Is that a no-no? Would Tom slap me excessively?

spawner

[spawnboy]

Ok

So lets say I go with the gas thru grip. There are no grips that I can find that have 3 ports. So do I just get whatever one I like and drill a hole. What do you suggest for a grip? 2 stage, 4?

HELP
spawner

[BajaBoy]

www.skanline.com look at the lapco or taso ASA.. its ment for a gauge