Bought used RT. need help

[shrapnel]

I just bought a used RT valve and being new to and never seen an RT work before I need some help. When I pull the trigger it will shoot and then the trigger will bounce off my finger and then leak air like im pulling the trigger too far. does this sound like anything youve seen before? any input will be helpful..thank you

[chris99506]

try changing the sear rod length, i had the same problem and that worked for me

[BajaBoy]

no leave the sear unless u got that used too, tell us your whole set up (frame.. unput ect.) what mag is it on?

[shrapnel]

mag

powerfeed right with stock grip frame. bought classic with RT valve in it.

[shrapnel]

rt

just put it back together and when I pull the trigger it fires once and i have to let the trigger go to fire it again.

[FrAuStY]

Sounds like it works to me.. the RT is NOT a Full auto gun. It's a very fast semi auto with the capability of firing 26 consistent shots (if you can pull the trigger that fast) Your gun works fine. Don't change anything and learn to pull the trigger. Before long..you'll be ripping strings of 13+ bps if you practice with it.

[shrapnel]

rt

isnt it suppose to bounce your finger back to pull the trigger again?

[PyRo]

What it does is the trigger comes back up with more force than it took to pull it. You can ajust this, by upping your input pressure, or getting a shorter on-off pin. It isn't supposed to be full auto, and it isn't supposed to bounce off your finger so you don't have to pull it.