I have some Mag ?'s.

[RTGuy86]

Ok it is more than likely i will be getting a classic mag for my cocker. what i need to know is can you put a e-mag center feed body on a classic mag? When are the new No feed body's coming out? lmk. i will need a center feed body soon.

does any one know where i can get a tank? i have a armageddon front reg but no tank. is there any place i can get one? any of you guys have one?

[PyRo]

You cannot put e-mag bodies on regular mags, to the best of my knowlage. There are vert feed bodies for regular mags. You can buy a cheap used tank, and swap the regs.

[RTGuy86]

ok thanks. i would much rather get a good tank only. im looking for a 68 or 88/3k

[Cristobal]

Originally posted by PyRo
You cannot put e-mag bodies on regular mags, to the best of my knowlage. There are vert feed bodies for regular mags. You can buy a cheap used tank, and swap the regs.

I'm going to dissagree with this and cite the main body differances thread. You *should* be able to put an emag/rt-pro body on a normal mag rail just fine. If you read the thread I linked to you'll see that sometimes the fit won't be quite perfect, but it can be remmedied.

As pointed out, though, you can get standard mag and minimag bodies in vertical feed which will fit your standard rail just fine. The only reason to use an emag/rt-pro body would be if you like the angled front styling better.

[RTGuy86]

where can i get one of those regular mag bodys at? im getting the mag for sure and need a centerfeed body. lmk

[Cristobal]

Originally posted by RTGuy86
where can i get one of those regular mag bodys at? im getting the mag for sure and need a centerfeed body. lmk

Click on the link for the agd online store in the title bar,

or,

go through Donggie at http://www.modifiedpaintball.com he sells pretty much the entire agd productline

[EnW]

The Emag/RT Pro bodies will fit the classic rails, BUT,
the length of the body pem(the little nut on the bottom of the body that the front frame screws goes in)is a little LONGER than regular Mag bodies. Therefore when the body is at rest in the rail it will have a gap between the body and the rail because the pem will bottom out in the rail hole.
This may or may not affect the performance of your Mag.
You can easily take the pem down to the right size with a file. I don't know the exact length...I measured it against a regular Mag body when I did mine.

[RTGuy86]

thanks alot guys

[EnW]

Here is a pic of my Emag lo-rise. No pics on the gun YET.

[RTGuy86]

enw hope you dont mind but where did you get that body and how much did you pay for it?

[EnW]

This was built for me by Brad Nestle at Paintball Maxx.
Drop him a line for custom work.
[email protected]

Paintball Maxx
5829 W. Sam Houston Parkway N.
Suite 601
Houston, Tx 77041
713.983.9190
713.849.3232 fax

I sent him my vert body to modify...he charged me $45 for the work. The cool thing was he did it the day he received it and kept me posted on it as he was working on it. I had it back to me within like 4 days...that included shipping time both ways! We do live in the same state though.
He may have extra bodies you can buy from him...I know he had at least one extra.
Trust me this thing is worth the money.My HALO doesn't stick up over my head. It is awesome!

[Polishpickles451]

dont' hurt me...please

I would go w/ a vert feed cocker...

[RTGuy86]

I already have one. just got one last week. it getting milled and annoed. so now im lookin for one for my mag.
I will only bunker you if i decide to hurt you.lol

[Polishpickles451]

ok...i HAVE A MAG for the record. I'll bunker you back