Okay. i have a micromag with a .215 power tube space, the smallest size my kit came with, and I still get a bit of leaking down the barrel when the trigger is depressed slighty. It's not a big issue but I do like to apply a small amount of pressure to the trigger prior to firing and it gets annoying. I'm thinking the problem might be the fact that it is a micro mag and therefore has a benchmark trigger frame and what could be a slightly different distance for the sear to move through. Any help would be great.
-
-
I believe that if you call the AGD tech line you can get shorter spacers. They don't put them in the kit because they're for very extreme cases.
-
How old is your sear assembly? Maybe it is worn a bit causing the bolt to sit farther forward..Except for the Automag in front, its usually the man behind the equipment that counts.Comment
-
well i tore apart the whole thing and cleaned everything last night, 3rd reg seat and still going out the back. and it seems to be fine this morning when i gassed it up, maybe my PT o-ring just had some dirt.Comment
-
If it is leaking out the back a lot and changing the reg seat doesn't help, remove the reg assembly and clean it. It may have a piece of dirt on the o-ring in the back.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment