EMAG Help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Devastator
    Registered User
    • Aug 2002
    • 5
    #1

    EMAG Help

    Hey guys, Im having a problem with my emag on E-mode.
    At first I thought that my battery was the problem that the gun would not shoot in this mode. I just recently bought a new one from agd and I still have the same problem. The board lights up when the battery is connected, but the gun will not fire. The led lights up when i pull the trigger (like it should) and its still kicking my warp feed (throught the intellifeed cable attached to the board). Anybody have an suggestions? I have been trying to call agd for quite some time now but i cannot get through, they are always busy. bummer! Help is much appretiated. thanks
    Dev
    Tags: None
    • Havoc_online
      www.havoc-online.com
      • Feb 2002
      • 2851
      #2
      hmmm, a few ideas, check your hall effects sensor and make sure all is well(no loose connection). Make sure your trigger magnets have not gotten loose or flown out.
      www.havoc-online.com <--- Your AGD Lifeline

      Products & Services

        Comment

        • Devastator
          Registered User
          • Aug 2002
          • 5
          #3
          Magnets are all in tact and hall effects sensor is operating. Im stumped lol

            Comment

            • Havoc_online
              www.havoc-online.com
              • Feb 2002
              • 2851
              #4
              u sure your in Emode? Check your selecter switch as best you can.

              does the gun fire in manuel mode? Have you checked your plunger rod? the solenoid?

              R U sure the safety is completely off?
              www.havoc-online.com <--- Your AGD Lifeline

              Products & Services

                Comment

                • Devastator
                  Registered User
                  • Aug 2002
                  • 5
                  #5
                  The only way it will fire is if im on manual and the trigger is hitting the sear. The led lights up when i pull the trigger which indicates the the hall effects sensor is working. The board even counts the shots when i pull the trigger. How should i test the plunger rod and the solenoid? they are not jammed at all, but i dont know how i would test them?

                    Comment

                    • jeradn325
                      Registered User
                      • Mar 2002
                      • 398
                      #6
                      I had the same problem with my e-mag and i just sent in into agd and they fixed it for free.
                      ----------Contacts----------
                      Email- [email protected]
                      AIM- Jeradn325
                      ----------Feedback----------
                      1. http://www.pbnation.com/showthread.php?threadid=194700
                      2. http://www.automags.org/forums/showthread.php?s=&postid=705153#post705153

                        Comment

                        • Devastator
                          Registered User
                          • Aug 2002
                          • 5
                          #7
                          they tell you what the problem was?

                            Comment

                            • jeradn325
                              Registered User
                              • Mar 2002
                              • 398
                              #8
                              no i still have to call them and find out what the problem was and how much everything costed.But if you send it in get level 10.
                              ----------Contacts----------
                              Email- [email protected]
                              AIM- Jeradn325
                              ----------Feedback----------
                              1. http://www.pbnation.com/showthread.php?threadid=194700
                              2. http://www.automags.org/forums/showthread.php?s=&postid=705153#post705153

                                Comment

                                • Pand0ra
                                  Don't open the box
                                  • Sep 2001
                                  • 377
                                  #9
                                  Check if the solenoid is working.

                                  Remove the valve, and press lightly on the back of the sear. It should move when you shoot.
                                  Otherwise you've got a problem with the solenoid.

                                  @++
                                  Intimidator Shocktech with Technatrigger.
                                  AGD Emag Extreme C&C Lvl10 ACE.
                                  "Pandora, that is the FIRST C&C Extreme to ever be sold." Manike

                                  "Destruction and reckless abandon. And you all helped to create it!
                                  WAY TO GO!" The EVE Online Team

                                    Comment

                                    • Devastator
                                      Registered User
                                      • Aug 2002
                                      • 5
                                      #10
                                      just sent it in to agd today. Thanks for the help guys!

                                        Comment

                                        Previous template Next
                                        Working...