Classic Mag chops way to much!

[Automaggin]

my classic feed chops way to much. everyone tells me cuase i shoot to damn fast for it. if i cut the feed tube down, will it feed faster? i dont have the money for level10 yet, and i have team practice this weekend. what should i do

[subbeh]

Find the thread for sanding the edge of your bolt. With my RT, if I shot fast AT ALL, I would chop. After sanding the bolt, I cannot think of one chop that was because the warp did not spin and load a ball half-way. Seriously look into it, that seems to be your problem.

Maybe someone with time / superior search skills can pull this thread up for him?

[Kevmag]

pf plug?

See if you have the newer stype Powerfeed Plug (Parabolic). I believe there is a classic thread that shows the differences. The bottom of the plug will have screws.

[BajaBoy]

it sounds like he has standard feed..

[p8ntballa]

http://automags.org/forums/showthrea...ding+bolt+edge
Try that. Dont cut the feed yet, it will create a smaller ball stack and be even easier to outshoot it.

[someVWkid]

choped tube

i chopped my tube, big mistake, dont bother cuz it makes the feed slower.

[misfit]

it doesnt matter if you cut the tube on a classic mag. it was made that long so you dont put you finger in it. i cut my old one and had no problems with it. you can do a serch on it if you want to find out for your self

[PyRo]

Do you have the extended nose bolt? Or do you still have one of the old ones. If you have an old one, get an extended or even better a level 10. A powerfeed body, and/or a warp should help with this problem.