Bottom grip screws.

[Potatoboy]

Does the intelliframe come with screws for the bottom of the grip? If so, are they long enough to attact a flatline and a warp? If not, What type of screw sould I ask for at the hardware store?

The screws that are on my mag now are two different lengths, one of them seems just long enough to go into the nut in the grip frame with the flatline and the warp, the other one is too short.

[Russ]

The Flatline drop is .375" (3/8") thick. Tha AGD Warp Feed adapter plate is .188" (3/16") thick. That adds up to .563" (9/16") I use 10-32 x 7/8" long button head cap screws (they take a 1/8" Allen wrench). That allows .312" (5/16") to screw into the frame. You could get away with 3/4" long screws, they are more common at a hardware store. Just be careful not to overtighten, it'd be easier to strip out the threads in the frame with the 3/4" screws. I prefer stainless steel screws, too.