Help/rt Pro

[VIN 1]

I just ordered a new RT/PRO
what barrel is best...........rec ball
ALSO what air setup is best
will be running warp
please help
GOAL........KICKIN BUTT !

[Telefragged]

I find the stock barrel to be quite adequate with the paint I shoot, and on the fields I play on. Accracy with proper paint/barrel match should be sufficient, but its not very quiet. Lack of porting makes it efficient as well. I'd recommend one of the Lapco barrels or a J&J Ceramic for woods/rec play as they're cheap and perform nicely.

Adjustable tanks are best on the RT's since changing the input pressure determines how the trgger feels. Anything by AGD, Air America, CenterFlag, etc should work out good. Screw in tanks work as well, you just won't be able to change trigger feel unless you get a new on/off pin from AGD.

[Z-man]

My take on the air setup

I would agree on the barrels. I like the stainless ones simply because they clean out well but with the addition of the lvl 10 upgrade I rarely need that anymore

As for the air setup, it will depend on how much you shoot and what kind of "feel" you want out of the trigger.

Telefragged spoke of the adjustable tanks being the best choice as I would highly recommend. I have used a preset on my RT and although it was nice, nothing compares to the ability to tweak your input to get the "feel" you want.

I have used the AGD 68ci tank (3000psi) and I currently use a 4500psi 88ci Smart Parts tank. I shoot a ton of paint in a day (4-8000 rounds) so I really wanted maximum flow at high rates and the Smart Parts tank does just that. You might want to look into a 68ci tank (the AGD one is very nice if you are not crazy like me )

[PyRo]

Stock barrel is fine. If you go aftermarket get somthing not more than 12in, minimal porting, and make sure that it matches the paint you are using. The RT barrel is Big bore, .691