Mag Upgrades

[kcraiglax]

would I need to think about a worp feed if I ran a halo, or would it be redundant ( might be a deciding factor for the intelliframe)? If I am not going to run a revolution hopper, would I be better off looking at the dye swing trigger frames?

[kcraiglax]

Freak Barrel System

Which size/ type works best with the mags. Should I look at the AA or Freak fronts? Also which lengths should I consider? I do like having max range, I am willing to loose ROF for range. the barrrels bome in 10,12,14,16, & 18" lengths. Which do I choose and is there any advantage between the aluminum back vs the stainless back other than flash or show?

[TefMag68]

talking about replacing your piston for HP?? whats that mean?? 3000psi? 4500psi?? I have a 3000psi crossfire preset tank do I need to get a new piston??

[angelKiller16]

Ok question #1 by craig,
If you had a halo the warp would be overkill. On the other note you could run the gun with a 12vlt X-board rev and later decide to get warp.

#2 the dye swing frames are for autocockers, they don't make one for mags

#3 berrals are tottaly preference. I would not excede 16" though. After 16" you start to reduce the velocity of the ball, lowering range. by the way thier is no trade off between range and ROF

#4 the AA fronts for the freak system do offer something, a quieter shot. thats about it an its not to much of a dif.

#5 other then durability thier is no dif between alu. and stainless. alum. is lighter but not as durable and stainless is heavier and more durable

lastly tefmag, your question

i was talking about changing the reg piston if you have an older valve when you change from C02 to HP. My mag is 10yrs old. when i got it i noticed a small leak out of the back, it was because i was putting to much pressure in the old reg. assebly. If your not having problems now then don't worry about it.

[angelKiller16]

sorry craig forgot to mentin that the medusa frame is comming out oct 14th? that sounds right, pretty soon and t' suposed to be amazing. magneticaly returned, adjustable mechnical trigger pull.

[kcraiglax]

Angelkiller, Thanks for the help, I think I might hold out for the medusa frame, do you know if it will be avaiable in a double trigger?

[angelKiller16]

no problem, and yes I am 99.999999999999999% positive that the medusa will be double trigger, it would be a horible marketing mistake if they wern't.

[magman550]

Hi, you might want to think about the J&J ceramic barrel and possibly the retro valve. I just got the J&J ceramic and used it at Skirmish and only broke about 2 balls all weekend and the accuracy was dead on.. ask the blue team.. he he good luck