Well I just got done doing the 12v. BAttery mod to my warp and tried it out. When I push the priming button it runs really fast but when I pull the trigger on my angel (Its hooked up to my angel lcd, no sensor) it just moves a little bit and not that fast. I tried removing and adding those black things on the circuit board with no luck. Can anybody help me out. It would be great to get my warp working for friday, Thanks.
-
-
try going here.... it may list something
angel to warp PDF
also i belive it is all jumpers off makes the warp spin for a longer time.....
now when you checked this were you doing singles shots or strings???
and welcome to AOVirus, King of the Basement Trollz has spoken
-
No matter how I put the jumpers it wont spin longer. Its like the jumbers airent working. Could I need a new board?Comment
-
Well I put it back to just 1 battery and it works fine, so im just going to order the PTP 12v. upgrade. Thanks for your help.Comment
-
this is why i dont use 12v warps...
i just run straight 18v.
what is happening is its taking a really long time to accelerate. so, for the time its going when you pull the trigger, its only speeds up a little bit.
i think it has something to do with the current requirments of the motor vs. the ability of the regulator.
it will probably go away with fresh batteries, but come back again quickly.
the PTP may not help."The Fine Print: Discontinue use if your eyeballs suddenly get way smaller."Comment
Comment