Need help w/ LVL 10

[Matt Crawford]

I have a boo-yah frame, works perfect w/ no problems.
I also have a lvl 10 installed on my other gun.
I decided to add the boo-yahh to the mag w/ the LVL 10, and now it wont work.Now if I take the lvl 10 off and add the stock bolt and pt tip internals it works fine.I dont it it, will the boo-yahh not work w/ the LVL 10?Or should I just get a hyperframe or swap back to my intelliframe?and get rid of the boo-yahh?

[BlackVCG]

Ditch the Boo-Yahh and use your Intelliframe. BTW- How is it *not* working? If it's not firing, make sure you're turning up the velocity to get it shooting.

[Matt Crawford]

the sear wont set the first time.as in it wont shoot.Yeah I am turning up the velocity.It works fine in the "stock" form w/ the AGD on/off and intelliframe.Is this problem prolly just tolerence issues?

[BlackVCG]

Keep turning up the velocity to the point that it leaks or bottoms out. If it doesn't fire, then go to a shorter bolt spring or use a larger carrier to decrease the o-ring friction on the bolt. If it leaks, then go back to the previous carrier. If none of that works, try it with the I-Frame and see if it works.