minimag with RT-valve and Lvl 10 ?

[B3RG3RMAN]

Im just curious, im playing with a really wonderful minimag that i wish to upgrade a bit.

What im thinking of is upgrading with the RT-valve and Lvl 10 upgrade is it possible to do both of them ?

Is it anything special i have to remember, any other upgrade i should do ? any feedback is appreciated.

[DaosBeoulve]

Welcome to AO

Sure, you can upgrade to both the RT valve and the lvl 10. Just put the lvl 10 upgrades on the rt valve when you get it, and you'll be set.

I haven't yet upgraded to the lvl 10 stuff, but there's a ton of threads giving hints and tips for installing it. You might want to check those out. Good luck=)

[B3RG3RMAN]

Thanks ! Another issue...

Well i wasnt sure about it so its better to ask than guess.

With that minor problem out of the air over to another question. How does the warpfeed work ? Do you connect the warpfeed between the mag and marker or is it a mag by itself ? does it work well ?

[virus]

well here is a pic of almost what you are talkin about... thouhg this show my Zgrip also...

shows with the warp also =)
and it does have the level 10 in it also

[Schnitzel]

retro + lvl 10 is probably the best you could possibly choose as of now. I can see that those items with a warp will be a sweet marker. If you dont alreay have an intellifeed, look into that too.

good luck.

[B3RG3RMAN]

Virus..... that marker...

Virus, i think im gonna marry your marker if you dont already have. Very nice one, thanks for the help guys, im gonna upgrade as fast as the balls fly.