well I got my warp today and the thing will not stop spinning, I think the dude sold me a dud, but can anyone tell me how to get it to stop
-
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow Stub -
well sounds like the sensitivty is up to high.... goto the circut board there will a blue pot on it.... counter clockwise turns it down.... clockwise turns it up....
also here is the link to the online manual for the warp.... it is in the .pdf format.....
warp info here
all the info you need will be there... if it stil wont work right let us know.... and we will see what we can do.....Virus, King of the Basement Trollz has spoken
-
its still not stopping at all, I think I got screwed, god I am PISSED OFFF, oh and another thing I noticed is that where the jumpers are supposed to be 2 of them, or so, well there is only one; also where is the vibration thing
and pressing the primer doesn't do anything
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
If it is an AGD warpfeed, the vibration sensor looks like a disc on the backside of the warpfeed. Checkout the exploded warpfeed in the AGD store for the exact placement.
It sounds like there is a short somewhere in the circuit, my guess it is at the potentiometer (blue pot). Did you buy it used? If you got it new, I recomend either bringing it back to the store to replace it or sending it to AGD, just remember to call them prior to sending it.
"The BEAST"
"No-Rise" E-mag
Level 10 Bolt
AGD Flatline 91cu in/4500psi
Black HALO B
"Red Heatseeker"
Red to Clear Fade Freak Factory Impulse
68/4500psi Max-Flo
Red HALO B
Comment
-
that's normal
a new warp needs to be "broken in" dl the manuel and look under "RUN IN"
or go Here for ALL about the warp.Comment
-
You probably need a new warp board.
Sorry dude.
Comment
-
nah I figured it out, there was a bad solder on the thing so I am just gonna get it resoldered and that should fix it
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
Was it used?
Comment
-
yeah i got it used
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
How much can a bad solder affect the warp? Is a bad solder the same as too much solder? I would like to know about this as a future reference.
Comment
-
bad solder= popped off the board somehow
btw Ironmag that is a nice sig pic
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
Comment