i need some help on my spyder very fast!!!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yeahthatsme
    aka yeahthatswang
    • Sep 2002
    • 2592

    #1

    i need some help on my spyder very fast!!!!!

    ok. my spyder sport keeps double and triple feeding. and the balls dont stay. they fall out of the barrel. my first thought was the ball detent. i replaced that. its still multi feeding. i'm pretty sure its not the paint-barrel match as this hasnt happened with this paint till now. thanks.
    [*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
    Image too large- Tato
  • virus
    AO's dirty little secret
    • Oct 2000
    • 1524

    #2
    if your paint is rolling out hte barrel then it is not a good match......

    a good match would be having to blow the ball out the end of the barrel..... but not make you blue in the face doing it......

    in your case the paint is too small for the barrel and probly to small to be stopped by your ball detent.....
    Virus, King of the Basement Trollz has spoken

    Comment

    • cphilip
      Former Moderator

      • Jun 2026
      • 16216

      #3
      ...and are you sure you put a good detent in? Should have a nice rubber tit on it. Double check you had a good one and it didn't fall right off when you put it in. If that is still good it HAS to be way to small but I never seen THAT small a paint that a spyder would not hold it in there.

      BTW: The detent in these things is in the body not the barrel...


      AGD, where we are so good we can do it with only ONE tube!

      cphilip.com

      Comment

      • yeahthatsme
        aka yeahthatswang
        • Sep 2002
        • 2592

        #4
        i know what the detent is. i replaced it with a good one. does anybody know what size 32 degrees competetition is? i have a ruffly .689 bore barrel. thanks for any more help.
        [*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
        Image too large- Tato

        Comment

        • Rabidus
          Registered User
          • Sep 2002
          • 76

          #5
          Hey, the best solution to your double feeding is to buy an Automag!!

          Comment

          • ZyperioN
            Rabid Chipmunk
            • Jan 2002
            • 577

            #6
            amen to dat rabidus!!!

            :headbang: :headbang: :headbang: Metal kids have more fun!! :headbang: :headbang: :headbang:

            Atleast wipers are good for something........target practice.

            -=Proud 04 Shocker Owner=-

            ::::::Punishers Paintball::::::

            Comment

            • darklord
              missing my matrix
              • May 2002
              • 2105

              #7
              have you tried doing the blow test? Put a paintball in your barrel and see if it fits snug, is too tight, or is too loose. If it's too loose then, bang! there's your problem. Paint isn't always EXACTLY the marked bore size... what barrel are you using? My stock shutter barrel would have PMI premiums roll right through. Make sure your paint-bore match is good.

              Good Traders: SupaTravis, Joeyjoe367, biker, Zenwood, arabian ape, beefstew, timmy63, ah137, kilaueakid, Will Wood, Remington, DicksonDood23, CPhilip, Fritzy, Dirtybunny, LittlePaintballBoy, JadedT, ChucktheMAGician, TheFlamingKoosh, lgavin
              My Feedback Thread
              Out of the sport... missing it.

              Comment

              • Bulldog
                Registered User
                • Jun 2001
                • 1374

                #8
                Are you using a HALO?

                Comment

                Working...