help me please

[sbikeclix]

i have a problem with my mag- when i shoot, it goes into this bust mode. as long as i hold the trigger back, it continues firing can anyone identify this problem?
i am using a mag with aq newly replaced sear and bolt, and a dye 2x frame. i started haviong this paroblem back when i had my stock frame though

[a_malfunction]

I was gonna say check your sear and bolt.... but you obviously already did. So, the only thing I can tell you is to wait and see if anyone else can help you, or call AGD up.

[sbikeclix]

up

does anything know what is wrong w/ my mag- i was thinking maybe it had something to do with my on/off valve not stopping airflow...

[steveg]

sounds like the little teflon oring on top of the on/off
valve is bad. check page 16 of your manual second from the right
in fact replace both the teflon and the urethane orings
in fact while your at it, if its been a while replace
all the orings in the valve
if you don't have the manual go here http://www.airgun.com/Images/automan.pdf on page 9/13

[MikeCouves]

Yeah I am pretty sure steveg is right. That happened to my friends Mag and he thought he screwed up his sear...but it was just the On/Off oring or one of those in the on off. Just do what steve said and check your manual.

[sbikeclix]

silly me....

i was looking around, and lo and behold, i found an on/off top lying on the ground around my workbench. seems it had not been put in at all. but the urethane oring looked pretty bad too, so i went and replaced that. thank you everyone that helped, ill just go back to my quiet lille corner now...