The manual says to put some drops of oil into the nearest air inlet or something and to put grease on the spring pack and piston o-ring...but should i put some oil on the bolt or anything else? 
-
-
Nope...the air in the line will get everything it needs to get. Do it often.
The bolt needs no oil.
And the spring pack rarely does need any thing. Just make sure there is some on there to prevent rusting is all. It's not there to lubricate, just to seal out moisture and prevent rust. Any Grease will do. -
hey phil what about bacon grease
Richmond
Forest Green Unmilled Viking #475
(black razor blade and black sticky3s)
black 14in Powerlyte Scepter Kit
Black Halo B
88/45 Centerflag Hyperflow StubComment
-
LARD!!!
Well it would work but its gonna stink after a few weeks in the heat....
Comment
-
How much oil should i put in the 2 holes marked -OIL-? and when i do put oil in those holes, am i putting oil on the spring pack? shouldnt i be putting some sort of grease on the spring pack?Comment
-
oh and one more thing (non related). The online mag manual says you can put the regulator seat on backwards and carefully re-assemble your valve...but ive heard putting it backwards will screw your velocity up? So does putting the reg seat backwards affect anything other than that it will fall out really easily?Comment
-
I store all my mags in a 5 gallon bucket of Crisco I picked up at Costco. It kinda sucks having to lick it all off before the games, but it does keep them shiny...
Comment
-
Criso huh? I would have though you kept your mags in buckets of SPAM.Comment
-
You can get 5 gallon buckets of Spam? Its gotta taste better than the Crisco
Comment
Comment