Get My Reactive trigger back
Bit of a problem with my Rt at the moment. I got a level 10 fitted at Campaign Cup and ever since ive lost the ability to bounce the trigger. It is still as reactive as anything but it just dosent bounce. Does anyone have any suggestions please?
-
Powered by an Emag and RT -
The pressure at the input is the same. However, the chamber pressure in the mag is higher so you have less of a pressure differential between the pull and the return. To get that "bounce" back you will probably have to increase your input pressure to regain that pressure differential.Except for the Automag in front, its usually the man behind the equipment that counts. -
Shorten the on/off pin. WARNING: Do this at your own risk
Comment
-
The marker should'nt have a sweet spot that goes full-auto. It's not tourny legal and is a malfunction of the marker. It should be one pull-one shot. Don't mess with your on/off pin, you'll mess it up and be without a marker till you replace it(if you do it right and it works, it will probably get you pulled from games.)
Welcome to AO....
Comment
-
Yeah, I should probably replace my on/off pin and just get an adjustable tank.Comment
Comment