small very small prob with emag

[JodoCast]

when i pull the trigger one it doesn't fire but i pull it again and it fires what to do

give me some pointers please!!

snap shooting like this sucks

thanks

emag man

[Havoc_online]

can you give the details of your set-up? level 7, level 10? input pressure? does the on/off have the black quad o'ring? is your velocity up?

[psifry]

what had you done to the Emag?

What have you done to the Emag? Did you play with the magnets in the trigger?

Does the solenoid click when the safety is ON and in electronic mode?

back out the magnets a little and try pulling the trigger with the safety on. You should hear the solenoid clicking.

ds

[ah137]

Need to know two things

Does the solenoid pull when you pull the trigger or the solenoid pull and the marker does not fire

I am guessing there is a problem with your trigger magnet setting

Check here

http://www.automags.org/forums/showthread.php?s=&threadid=26417

Hills

More or less what psifry said?

[JodoCast]

when i pull the trigger once you hear the click (the gun doesn't fire) then you pull it again and it does fire

i have level ten and really haven't touched the magnets

what should i do

[Havoc_online]

you can't expect us to help if you don't answer all of our questions, sorry, you have to be specific since we dont have the marker in our hands.

[ah137]

Is your battery fully charged. leave it charging for 6 hours or overnight. Just not more than that

Hills

[bunkerhugger]

I was having this problem too. I super polished the bolt piston and it went away. Tom also suggested moving to the next largest carrier.

[athomas]

Sounds like bolt stick. Try oiling your bolt stem. Once your level 10 is broken in, it will probably be ok. Until then, if the oil doen't work, you may have to go to the next larger o-ring carrier in your level 10.

[hitech]

Originally posted by AGD
The first shot sticking after a while in limbo is an absoulutely classic L10 problem. You must use the biggest carrier that will hold air and the middle spring if you want to fix it.

AGD