This is your emag on level 10

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Reo5th
    Sold Angel StillHave Rebel
    • Jul 2002
    • 539

    #1

    This is your emag on level 10

    I got my emag, shot it for a while, never shortstroked. Pretty good gas efficiency.

    Installed my level 10:
    2 Carrier
    2 shims

    Now, in manual/hybrid i can't rip as much as I used to be able to. The efficiency went down to about 550 shots per 3000 fill on my 68. and the gun seems to 'shortstroke'

    I know i shouldn't ask for this, but the sweetspot is also gone!

    I know i've done something incorrectly, i just don't know what.

    Could someone please help!?

    thanks
  • BajaBoy
    Registered User
    • Jun 2002
    • 2158

    #2
    use the small spring and shoot in the 270's.. or use med spring with higher input
    RT
    Ace'd Emag (sold)
    Xmag (sold)

    Comment

    • joeyjoe367
      Confirmed 11 bps RT User!
      • May 2001
      • 1982

      #3
      add a shim, gas it up. Keep adding shims until the gun leaks, then remove one.

      That should solve your problem. I think a lot of times RT valves (in my experience) need more shims than std. valves.

      My Trading Feedback

      "The only thing necessary for the triumph of evil is for good men to do nothing."
      -Edmond Burke

      Comment

      • manike
        INCEPTIONDESIGNS.COM

        • Jan 2001
        • 3820

        #4
        Increase the input pressure into the gun. It sounds like it is starving a little. Level 10 needs a better input of air in my experience, you can get this with a higher input pressure or a better reg.

        To get better efficiency use the middle spring.

        manike
        Inception Designs - My new company where Innovation is the Inspiration

        Comment

        Working...