Intellifed Warp problem

[Will Wood]

..It just keeps on spinning. Yes I changed the lil black thing so the middle one is empty.

I finally got this back from Subbeh, was wondering if it might have anything to do with the 12v or whatnot.

[Dayspring]

there needs to be a capacitor on the 12v regulator "out" line. I have a thread asking the same thing, couple pages back. I ended up ripping out the 2nd battery & all that jazz, and just keeping the on/off and LED.

www.robagd.com has a fix as well.

Glad to hear you got it back. I hope yours was wired cleaner than mine was.

[marley618]

The gun has to be gassed up so the sear is pushed out. If that doesnt work push the metal thing that touches the sear down, so it doesnt touch the whole time. Make it so it only touches when you pull the trigger.

[sniper1rfa]

if its intellifed, the middle one should be CLOSED, not empty. assuming, of course, you are using a normally open switch. try is with only the middle one covered. if it doesnt work, try the top one...