the power tube tip on my minimag is STUCK HARD! i tried to unscrew it and it just bent the coin. what should i do?? help me fast because i can't wait to install my lvl 10 upgrade!
-
[email protected]
---------------------------------------
For Sale:
Hopperleft Minimag
Level 10 Upgrade
Dye Drop-forward
Black Macroline
PMI 10 degree ASA
3 weeks 4 days until Christmas! -
I had to use two sets of pliers to take mine apart.
JackCenter Feed MiniMag!
Hyperframe
LVX
blah, blah, blah! -
If you have a heat gun you could try heating the powertube first, some of those tips are a real pain if they havent been removed in a long time. If you try pliers or vise-grips use a peice of rubber or something between them so you dont scratch the parts. Good LuckGreat Traders: RogueFactor,DoobieComment
-
I had the same problem w/ my minimag, it was a *****, and for a while i was afaid i was gonna do damage to my tip, but what i did was used a nickle (cause it's think so won't bend, i bent a quater as well) and clamped the coin in a pair of vise grips to take it off, then just retightened it w/ just the coin so it wouldn't be so hard in the future, haven't had any problems w/ it since.AIM- TheJester493 IM me some time
take a look at my minimag
....
http://www.automags.org/forums/showt...threadid=64837Comment
Comment