Broken Pin

[Hot_Rod]

I have a broken pin on the bottom of the reg. What would be the best method of taking the rest of the pin out?
What would happen if i just left it there, the way it is?

[banzaimf]

which pin are you talking about?

I have a feeling that you may be referring to the one sticking out of the valve body that is for aligning the valve and the rail together.

[Hot_Rod]

That's the one. Its on the bottom of the reg/valve. It's the one for aligning the rail with the valve.

[Tunaman]

It looks like a 1/8" roll pin. Just drill it out and tap a new one in.

[Hot_Rod]

Tunaman,

It was the pin you told me that broke at the tourney in Long Island. You installed the Lvl 10 in my RT. So I should just drill it out?

Or sould I send it out to AGD?

[banzaimf]

Z-lock pin

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=54&CATID=6

if you think you can take it out safely, I would go for it. THe main issue with having a working one is to make sure that if you drop out the field strip screw, the vlave won't shoot back. also, if for some reason the field strip screw shaers, the z-lock pin will give you some sort of safety factor before the valve becomes a projectile

[Hot_Rod]

banzaimf,

Much appreciated.