2 Problems with my micro emag

[alee@usma]

1) The magnet came off the trigger. Is is possible to send this in to AGD and get it fixed before world cup? I was planning to use this marker as my primary.

2) The Level 10 bolt is consistently tearing apart my RT bumpers. It's simply shredding the ring from the inside out. Anyone else experience this problem? Beyond that, the level 10 works fine. It's happened in the micro mag, and in my regular emag.

[athomas]

You can glue a new magnet in the top of the trigger using a good epoxy. Make sure you clean the aluminum using toluene to remove all previous glue spots.

As for the bumpers. I don't know about that one. I've fired 15000 rounds through my emag and the bumper looks like new. Maybe your level 10 bolt has a sharp edge on the back.

[Load SM5]

Some people go through bumpers pretty quick with level 10. I have about 10,000 shots on my current bumper and it's showing a little wear. I ordered 3 spares last time from AGD just in case.

[56kSomeGuy]

Yea, I've also been noticing the ware and tare level 10 is doing on my bumper I shreaded about 2 in my micro-e and ran out so I tried a little experiment with my lev 7 bumper(blue bumper from classic valve) I'm not sure if it will mess up my gun but it seems to work better than the rt bumpers since it is much stiffer and not so soft.

[alee@usma]

final:

I called AGD. They're working on a new bumper for the level 10. I think a lot of people are having this problem.

also: thanks for the mag hints: however, I just decided to send it back to PTP for repairs. Hopefully I'll have it back before wednesday next week.

[a_malfunction]

Good luck with that.... PTP doesnt always have the quickest turn around times....


My bumpers get shredded too. I had a bumper that I only put about 3-4 cases on it before I switched to level 10. It was in pretty good shape. After putting level 10 in, It was gone after about 3 cases. I'd order some from AGD just to have some back ups.

And Dont put a classic mag bumper in an RT/emag.... It doesnt give the bolt enough cushion for the faster speeds that an RT fires at.

[alee@usma]

however

AGD told me that a blue bumper would be fine until they come up with a new design.